11
MMC-1000
3
1
2
Front view
Rear view
1
3
2
Complete product
Unbalance type and Balance type cable Connecting method
* Please do not change position of 1 Signal cable and 3 Signal cable when you connect it.
* Please note this that the line color is an example of helping your understanding.
It is different from actual color.
1 : Signal
2 : GND
3 : Signal
Assembly diagram
1. Put cable into ④ -> ③ -> ②.
2. Connect the cable core wire by soldering on
the connecting pin of ②.
3. Put ③ into ②, after that fix the cable by
pressing iron part of ③.
4. Insert ②+③ into ①.
5. Insert ①+②+③ into ④, after that turn it.
Assembly method
2
3
4
1
Correct
Incorrect
Unbalance
type (2 line)
Balance type
(3 line)
Left
Right
Left
Right
Left
Right
Left
Right
