manualshive.com logo in svg

CastleNet CBW500, User Manual, Page: 26 / 42

Share
Download
CastleNet CBW500 User Manual Download Page 26

Filter Java Applets

 Java is a programming language for websites. If you deny 

Java Applets, you run the risk of not having access to Internet sites created 
using this programming language. 

 

Filter ActiveX

 ActiveX is a programming language for websites. If you deny 

ActiveX, you run the risk of not having access to Internet sites created using 
this programming language.

 

 

Filter Popup Windows

 Deny to open popup windows trigger form Internet. 

 

Block Fragmented IP Packages

 Block the IP packages that been cut into 

smaller units when transmitting over a network medium. 
 

Firewall Protection

 Firewall feature will protect your network from a wide 

array of common hacker attacks. 
 

7.4.3 Local Log 

This page allows configuration of Firewall event log reporting via email alerts 
and a local view of the attacks on the system. 
Follow the instructions below to create the Time of Day (ToD) filters: 
1.  Enter the contact Email Address and SMTP Server Name. 
2. Tick the 

Enabled

 check box and then click 

Apply

. 

The event logs will be listed in the table in this page. 

 

 

 21

Summary of Contents for CBW500











































Reviews:

No comments