EURO User Manual
Engineer Reset
Page 21
When an alarm has been cancelled and the
Police have been notified by the Alarm
Receiving Centre (ARC), you will see the
screen shown left when you try to use the
system.
It is usually necessary for an engineer from
your installation company to check the
installation and reset the system for further
use.
But if you have caused the alarm in
error
your Alarm Receiving Centre or Alarm
Installation Company may permit you to reset
the system without an engineer present.
You will be required to quote a 6-digit code by
telephone (advise them that the system is a
Castle Euro ONE). You will then be given a
special code which will reset the system
for
that one occasion
only.
Press
‘NO’
Enter the anti-code given to you by your
installation company.
You alarm in now restored and ready to use.
This 6-digit code is also displayed in the ‘user
menu’ – see page 43.
Quote G19867
Anti-Code Needed
Euro 46
Time 15:15
Engineer Restore
Performed
Quote G19867
Anti-Code Needed
Enter your Code
[* ]
