Page 45
View Saved Logs [LOGS]
Select this option to view saved logs on your instruments display. Only
cumulative information is available to view on the instrument, if you wish to view
this and recorded interval data then download the data via a USB port into the
supplied software dBdataPro-LITE or dBdataPro if registered.
Logs are sorted by date and time, first select the date the recording was made
and then select the time using the following procedure: -
In the
MENU
display screen use the
arrow keys as required until the
following is displayed (If no logs are available this option is not shown): -
Press
and the instrument will display the currently saved logs in date
order.
Scroll through the available dates using the
arrow keys.
Press
to exit without selection or
to confirm the selection, the
instrument will then display the currently saved logs by time recorded: -
Scroll through the available times using the
arrow keys.
Press
to exit without selection and return to the date list or
to
confirm the selection, the instrument will then view the saved cumulative
information for the log selected.
Every 5 seconds the screen will flash the following display to remind the user
that they are currently viewing a saved log: -
Scroll through the available data using the
arrow keys.
Press
to exit and return to the parameter display screen when required.
Logs saved with Exposure Time details calculate the displayed Lep,d figure using
the Exposure Time value. The downloaded value of Lep,d is always based on the
run time period (log length).
See also
Model ‘L’ & ‘E’ Instruments
under
Stop / Record Mode
of
Chapter 6
and also
Function Equations
of
Chapter 11
.
C
C
C
OK
OK
OK
LOGS
22.06.11
15.35.48
LAq 56.3
LOG VIEW
