Underground Scissor Lift QJY3.2-1
12
1
Turn the main switch to position ON. Lift is ready for operation.
2
Push and hold UP button until lift reaches desired height.
Lift stops once button is released or upward travel limit is reached.
3
When the lift raised at a required height, push the LOCK button to place the lifting load on the
mechanical locking device for releasing loading pressure of hydraulic system before service
operation.
8.3.3
Vehicle in Raised Position
Observe all accident prevention regulations.
Do not allow unauthorized persons to stay under the raised Vehicle.
Avoid rocking of vehicle.
Keep lift free of tools, parts, etc.
8.3.4
Lowering
During raising and lowering cycles: Closely watch the vehicle and the lift, do not allow
anyone to stay in lift area and make sure the vehicle doors are closed.
1
Remove tools, stands or other objects from lift bay.
2
Turn the main switch to position ON.
Lift is ready for operation.
3
Push DOWN button and lowering the lift to a desired height.
Lift stops once switch is released or downward travel limit is reached.
4 To lower the platforms completely, release the
“DOWN” button, press the “DOWN” button
again.
8.4
Protection against Unauthorized Usage
When in position OFF, the main switch can be protected against tampering by means of a padlock.
