background image

 

 

 

 

 

 

 

 

 

 

 

 

1Safety 

1.1 Introduction 

Thoroughly read this manual before operating the lift and comply with the instructions. 
Always display the manual in a conspicuous location. 
Personal injury and property damage incurred due to non-compliance with these safety 
instructions are not covered by the product liability regulations. 
 

1.2 Intended Use 

This single column vehicle lift is classified as movable model. Movable single column 
vehicle lift is specially useful for indoor. It is the special equipments for lifting vehicles, such 
as cars, which park on ground, to a certain height for maintenance. It is forbidding to park 
vehicles. Observe the rated load capacity and load distribution of the lift. 
 

1.3 Safety Instructions for Commissioning 

  The lift may be installed and commissioned by authorized service personnel only. 
  The standard lift version may not be installed and commissioned in the vicinity of 

explosives or flammable liquids, outdoors or in moist rooms (e.g. car wash). 
 

1.4 Safety Instructions for Operation 

  Read the operating manual. 
  Lift operation by authorized personnel over 18 years only. 
  Always keep the lift and lift area clean and free of tools, parts, debris etc. 
  Once the disk adapters contact the lift points, check arm restraints for engagement. 
  After raising the vehicle briefly, stop and check the disk adapters for secure contact. 
  Always lift the vehicle using all four adapters. 
  Make sure the vehicle doors are closed during raising and lowering cycles. 
  Closely watch the vehicle and the lift during raising and lowering cycles. 
  Do not allow anyone to stay in lift area during raising and lowering cycles. 
  Do not allow anyone on lift or inside raised vehicle. 
  Only use the lift for its intended purpose. 
  Comply with the applicable accident prevention regulations. 
  Do not overload the lift. The rated load capacity is indicated on the lift nameplate. 
 

Only use the vehicle manufacturer’s recommended lift points. 

  After positioning the vehicle apply the parking brake. 

Summary of Contents for QJY2.5-H

















Reviews: