7
Juno & Vulcan
Issue 01 06/13
If the stove is to be used with smokeless fuel exclusively then the solid fuel fitting kit
(supplied separately) must be fitted to the stove according to the instructions supplied
with it.
Upon completion of the installation, allow a suitable period of time for any fire cement
and mortar to dry out. A small fire may then be lit and checked to ensure the smoke and
fumes are taken from the stove up the chimney and emitted safely to atmosphere.
Advise the customer not to run the stove at full output for at 3
– 4 days. Explain that the
stoves can provide much more or less than their rated heat outputs depending upon
how they are burnt and fuels and fuel loads used.
Warn the customer that using excessive air (having the air controls open too wide
for too long) can over-fire and irreparably damage the stove. Damage caused by
over firing is NOT covered by any warranty.
On completion of the installation and commissioning, check all parts of the appliance are
correctly fitted and ensure that the operating instructions and operating tools (including
gloves) for the stove are left with the customer. You must be sure to advise the
customer on the correct use of the appliance with the fuels likely to be used on the stove
and warn them to use only the recommended fuels for the stove.
Advise the user on what to do should smoke or fumes be emitted into the room from the
stove
– see
Safety Notes
section. The user should be warned that they MUST use a
suitable fireguard in the presence of children, aged and/or infirm persons.
5.0 Technical Data
Model
Juno
5kW
Vulcan
8kW
Appliance gross weight
(packed) (Kg):
74
81
Efficiency on wood fuel: (%)
79.0
78.6
Declared nominal output:
(kW)
5.0
7.6
Tested wood re-fuelling
interval: (h)
0.75
1
Flue gas mass flow on wood
fuel: (g/s)
5.1
5.8
*Flue Temp on wood fuel:
(Deg C)
229
302
*at nominal heat output
Max Log Length:
375mm
14.5”
375mm
14.5”
Efficiency on Ancit fuel: (%)
75.4*
77.2*
*With DEFRA air limiter fitted
– approx. 81% without.
Declared nominal output on
Ancit Fuel: (kW)
5.0
8.0
Tested Ancit re-fuelling
interval: (h)
1
2
Flue gas mass flow on Ancit
fuel: (g/s)
4.5
5.9
*Flue Temp on Ancit fuel:
(Deg C)
276
329
*at nominal heat output
