G r o u p c a l l s
Q
Make a group call
Call the selected talk group
Press and hold the PTT key when the name of the selected group is displayed
in the idle mode. You can start speaking after a short tone is played and
appears on the display.
Your organisation can define "receive only" groups to which you cannot make
group calls.
Call a scanned talk group
To make a call to a scanned group after the conversation has ended, press
and hold the PTT key while the group name and
are still on the display.
If you have set the PTT key to always make a call to the selected group, you
cannot call a scanned group in this way; see PTT key settings on page 37. To
call the scanned group, first set it as the selected group; see Select a talk
group on page 36.
Call a dispatcher (network service)
1. To access the list of talk groups in the selected folder, press
in the idle
mode.
2. Scroll to the desired group, and press
.
If the group whose dispatcher you are calling is not your selected group or if
you are not scanning the group, you may have to wait a few seconds before
your call is connected. Note that all talk groups may not have dispatchers.
If the call is changed to a one-way call,
is displayed, and
you must press and hold the PTT key when you speak.
You can also set the radio to start a phone call to the dispatcher of the
selected group when you press the duty key
page 87. If the call is changed into a one-way phone call, press and hold the
PTT key when you speak.
TMR880i_rel7.book Page 40 Mardi, 27. août 2013 11:00 11
