manualshive.com logo in svg

Cassidian TMR880i, User Manual

Share
Download
Cassidian TMR880i User Manual Download Page 2

PS10889EENAA01

TMR880i - User Guide

2/115

This document is the property of Cassidian and should not be copied or circulated without permission.

DECLARATION OF CONFORMITY 
We, Cassidian Finland Oy, declare under our sole responsibility 
that the product TMR880i is in conformity with the provisions 

of the following Council Directives:1999/5/EC (R&TTE) & 2011/
65/EC (ROHS). Copies of the Declaration of Conformity can be 
found at https://cinfodin.cassidian.com.

The crossed-out wheeled bin means that within the European Union the product must be taken 
to separate collection at the product end-of-life. This applies to your device but also to any 
enhancements marked with this symbol. Do not dispose of these products as unsorted municipal 
waste. Please deliver this product after operational life to your distributor or sales representative 
for recycling.

Copyright © 2010-2013 CASSIDIAN. All rights reserved.

US Patent No 5818437 and other pending patents. T9 text input software Copyright (C) 1997-2008. Tegic 
Communications, Inc. All rights reserved.

Cassidian® is a registered trademark of Cassidian. Other product names, trademarks or other identifiers 
mentioned in the document may be trademarks of their respective companies and are mentioned for 
information purposes only.

The document is confidential and contains legally privileged information. The document may only be used 
for the purpose for which it is submitted. Reproduction, transfer, distribution or storage of part or all of 
the contents in this document in any form without the prior written permission of Cassidian is prohibited.

Cassidian operates a policy of continuous development. Cassidian reserves the right to make changes and 
improvements to any of the products described in this document, and the right to revise this document or 
withdraw it at any time without prior notice.

Cassidian will reasonably ensure that the information provided in this document is free from material 
errors and omissions. However, the suggestions, directions, comments and statements made in the 
document (e.g. regarding the compatibility, performance and functionality of mentioned hardware and 
software) are not intended to be and cannot be considered as binding. The contents of this document are 
provided "AS IS". The customer assumes full responsibility for using the document or any part of it. All 
comments and feedback are welcomed by Cassidian and are used as part of the continuous development 
and improvement of Cassidian’s products, services and the document. Except as required by applicable  
law, no warranties of any kind, either express or implied, including,  but not limited to, the implied 
warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, 
reliability or contents of this document.

 

To the maximum extent permitted by the applicable law, under no circumstances shall Cassidian be 
responsible for any loss of data or income or any special, incidental, consequential or indirect damages 
howsoever caused.

The availability of particular products may vary by region. Please check with the Cassidian reseller nearest 
to you.

The use and operation of this device is subject to permission: for details contact your local frequency 
authority.

TMR880i_rel7.book  Page 2  Mardi, 27. août 2013  11:00 11

Summary of Contents for TMR880i





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands