Cassida Xpecto MIX value counter
moving money forward
11
10
ENTER
BACK
15
16
1)
Set
batch number.
2) Counting speed selection.
3)
Enable / disable sorting mode by
orientation
.
4) ON/OFF ADD Mode.
5) Auto/manual start selection.
6) Sorting according to the Year of issue.
7)
Set date/time
.
8) On/OFF beep sound.
500
200
800/1000/1200
Up to 6
UV, MG, MT, IR, 2 CIS IR
3,3
”, color touchscreen LCD
220/50, 110/60
40
280õ280õ240
5,6
Hopper capacity, bills
Stacker capacity, bills
Counting speed, bills/minute
Number of currencies
Counterfeit detections
Display type
Power supply, V/Hz
Power consumption, W
Dimensions (HxWxD), mm
Weight, kgs
When using the Cassida Xpecto counter, basic precautions should be followed, including
the following:
1.
Do not use this unit in areas where it may be exposed to water or any other liquids.
2.
Only use the power cord supplied with the machine. Plug the power cord into a
properly grounded wall outlet. Do not remove the ground pin from the power cord.
Failure to properly ground the machine can result in severe injury or fire.
3.
Make it certain that the unit is installed on a flat surface. Do not operate the machine in
areas with high temperature, humidity or smoke, as these conditions may prevent proper
operation.
4.
This unit is designed for indoor use in a ventilated environment. Keep the machine away
from direct sunlight and strong magnetic fields. These could interface with the counterfeit
detection sensors.
5.
When not using the unit for an extended period of time, disconnect the power cord from
the wall outlet.
6.
Unplug the unit from wall outlet before cleaning. Use a damp cloth or specifically
designed maintenance accessories such as air duster, soft bristle brush, or cleaning cards.
7.
To avoid the risk of electric shock, do not disassemble the unit. Disassembly will expose
you to dangerous voltage and other safety risks. Also, incorrect reassembly can cause
electrical shock when the unit is subsequently used.
Take the unit to a qualified technician when service or repair is required. Do not try to
replace any parts yourself. Supplied spare parts are intended for use by qualified repair
personnel only.
9)
User settings
.
10)
Service settings (with password)
.
11)
Software version
.
12) IR & MT image save.
13 & 14) Go to next
/
previous page.
15) “ENTER” for selection.
16) Return to main display.
1.6
Specifications
1.7
Important safety notes
7.
Time
8.
Beeper
9.
User Setting
10.
Service Menu
11.
Version
12.
Save Image
Main menu (FUNC button)
15
ENTER
16
BACK
1.
Batch
2.
Speed
3.
Orientation
4.
Auto ADD
5.
Auto start
6.
Issue
14
2.
OPERATING
2.
1 Powering up and loading bills
It is very important to place the bills into the hopper correctly, because recognition
performance of the bills is highly affected by the arrangement of the bills. Bills should be
placed in a neat stack prior to being placed into the hopper. Please avoid counting bills
that are wet, excessively dirty, spoiled, folded, curled or with foreign materials like clips,
bands, etc.
It will damage and cause malfunction of the machine.
13
16
BACK
