Moving money forward
®
3.3
Counting paper currency
To count paper currency:
1. Remove coin cup from the cup support hod
2. Assure paper currency is selected
3. Select the bill denomination using the < or > keys
4. Bills should be pre-sorted by denomination
5. Place bills of the single denomination chosen directly on the cup support hod
6. An audible tone tells you the count and value are registered
7. Remove the bills and the TillTally will automatically continue on to the next
higher denomination
8. If you need to count a lower or higher denomination stack of bills, select the
denomination by using the < or> keys
Begin with 10 to 15 bills and then add small stacks of bills. If you place too many
bills at once the message OVERLOAD REMOVE SOME BILLS OR CUP will appear.
This means you attempted to place more bills than the scale could count at one
time. Remove some banknotes from the cup support hod until the OVERLOAD
error disappears. You do not need to remove all bills from the hod, simply peel
back enough bills until the error is corrected. The counting process can then
continue. The TillTally hod can hold up to 200 bills.
The TillTally Elite features dynamic weighing, meaning it learns to count more
bills over time. Initially you’ll start feeding the scale with 15 bills, but over time the
TillTally Elite will allow you to feed as many as 25 bills onto the scale. The dynamic
weight not only will speed your cash processing, but it also compensates for
worn, soiled and taped bills that might be rejected by other types of bill counters
and other scales without dynamic weighing. The TillTally Elite can hold up to 400
bills on its cup support hod.
NOTE: The TillTally does not count or total $2 bills.
10
SETUP
CLEAR
INFO
OK
<
<
+
Float On/Off
Quantity
Amount / Sum
Unit / Reference
Auto Add
+
1,2,3...
Auto Count
Float
i
1
a
b
c
d
e
2
3
4
5
6
7
8
9
10
11
0000000.00
0000
000
000000.00
00000000.00
