Non contractual document - Cassese France
®
- Document non contractuel
5
D) SETTING AND STORING THE WEDGE POSITIONS
Unlock the wedge position stop handles 5, 6 and 17.
6
17
5
C) SELECTION OF WEDGE POSITIONS
The CS20 CART is designed to join mouldings in one, two or more positions
without limitation of the number of wedges in any of those places. The selection
depends on the width and height of the moulding to join.
As a general rule, a MINIMUM 2 mm clearance (less than 1/8”) above the wedges
shall be respected.
Same size wedges can be stacked in order to avoid changing the size of wedge
when joining tall mouldings.
140mm
stroke
2mm MINIMUM
2mm MINIMUM
AS A GENERAL RULE, THE WEDGE POSITIONS MUST BE SELECTED
VERTICALLY TO THE HIGHEST POINTS OF THE MOULDINGS.
