Non contractual document - Cassese France
®
- Document non contractuel
17
G) OPENING THE BACK PANEL
In order to access more easily to mechanical parts, you will need to slide down the back
panel :
Unlock the screw shown
above.
Then, just slide down
the back panel.
H) REPLACEMENT OF THE WEDGE DISTRIBUTION CHANNEL WIRE-
STRAINER
At the other hand of the wire-strain-
er, use the n°4 allen key in order to
remove its 2nd holding screw.
Using the Pipe wrench, remove the nut
holding the wire-strainer on its screw.
Release the wire-strainer from its screw.
First, slide down the back pannel as described previously.
You will need :
- Pipe Wrench 7mm
- Allen Key 4mm
1.
2.
3.
Repeat the procedure backward to install and fasten the new wire-strainer.
