6.3 Safety instructions relating to maintenance
Daily check the state of your appliance: do not use it if it is damaged or if the power cord is damaged. If the
power cord is damaged it must be replaced by a professional electrician.
In case of break down contact your supplier.
Any intervention work on your appliance must be performed by a qualified professional.
6.4 Troubleshooting
Your appliance is provided with an overheating protection. When this protection has been activated you must
let your appliance cool down.
ADVICE
If overheating protection has been activated let your appliance cool down.
If your appliance does not start check the power cord.
The use of adaptors, multiple sockets and/or extensions is not recommended.
For any other anomaly contact your supplier.
ADVICE
Waste Electronic and Electric Equipment
To avoid any abuse and dangers and to fit the rules of the concerned countries before disposing of the used
appliance you must remove main electric cable.
7. IF OPERATING ANOMALIES OCCUR.
ANOMALIE
CAUSES
EXPLICATION
The appliance does not
function and the heating
indicator is not lighted.
>The power cord is unplug.
>The fuse of the power supply
started or is defective.
>The control unit does not function.
>The high limit thermostat in on.
>High limit thermostat is damaged.
>Plug the power cord.
>Control the fuses.
>Check the position of the control unit.
>Press the reset button on the back
side of the appliance.
>Contact your retailer.
The appliance is on but it
does not heat. The heating
indicator is not lighted.
>The high limit thermostat is started.
>The heating element is damaged.
>The contact with the heating
element is damaged.
>Contactez votre revendeur.
