13
Reattaching the Filter
1.
Gently lay the filter back onto the machine with the
diamond pattern facing the interior of the unit and the
honeycomb patter
n
facing out.
2.
Replace the rear cover to secure the filter in place.
Reattaching the Rear Cover
1.
Slide the rear cover back into place. You will hear a click.
2.
Insert the Rear Cover Screw into the hole
above
the Power
Cord Port and tighten.
Removing and Cleaning the Front Grille
1.
Locate the Front Grille Screw on the front of the machine
above the CASPR logo.
2.
Using your screwdriver, carefully remove the Front Grille
Screw and place where you will easily find it later.
3.
Remove the Front Grille by pushing up from the bottom
of the Front Grille with your fingers. Be careful to ensure
the Ionization Needle (in the top center of the front of the
unit) is not damaged.
4.
Clean the Front Grille using (compressed air, vacuum
cleaner, damp cloth or warm soapy water) and set the
Front Grille aside.
5.
If the Ionization Needle is visibly dusty, gently clean it
with a cotton swab and clear alcohol-based cleaner or
rubbing alcohol
Reattaching the Front Grille
1.
Align the Front Grille to the front of the unit, being careful
not to damage the Ionization Needle at the top center of
the unit.
2.
Insert the screw and tighten it.
13
