Caso WineSafe 18EB, Operating Manual, Page: 38 / 105

caso Wine Safe 18EB 38
•
This unit is not designed to be installed in an RV or used with an inverter.
•
The electrical safety of the device is only guaranteed if the device is connected to a
properly installed protective conductor system. Operations using an electrical outlet
without a protective conductor are prohibited. If in doubt, have the house installation
checked over by a qualified electrician.
The manufacturer cannot be made responsible for damages that are caused by a missing
or damaged protective conductor.
11 Operation and Handing
This chapter provides you with important notices with regard to operating the device.
11.1 Operating elements and displays
The device transmits the following signal sounds as an acoustic feedback signal:
Please note
► Use the buttons and to set the temperature in the range of 5-22°C.
► Temperature recommendations: Red wine: 12°C – 16°C and white wine 6°C – 10°C.
► The display indicates the average temperature of the appliance at the moment.
If you press the power button the device starts working.
You can set the temperature as your desire by pressing the button. There are three press-
button on the panel “ ” and “ ” to adjust the temperature by 1°C among 5-22°C.
You can tune the interior light on or off by pressing the “Light” button.
Pushing the temperature key up and down for 5 seconds, then, temperature display mode
will be exchange between °C and
°
F.
The temperature in the device depends on the room temperature, the quantity of bottles and
the chosen temperature.
11.2 Rating plate
The rating plate with the connection and performance data can be founded on the back of
the device.