Caso MG 20 Menu, Original Operating Manual

Page: 53 / 182

caso MG 20 Menu 53
11.5.2 Avoiding radio interference
The device can cause the occurrence of interference in radios, televisions
or similar devices.
Such faults can be rectified or reduced as a result of employing the
following measures:
•
Clean the door and the sealing surfaces of the device.
•
Set the radio, the television, etc as far as possible away from the
device.
•
Connect the device to a different electrical outlet, so that various power
circuits are used for the device and the receiver with the interference.
•
Use a properly installed antenna for the receiver, to ensure good
reception.
11.6 Assembling the accessories
Please note
► The device can be operated with glass turntable or with glass turntable
and metal rack.
11.6.1 Glass turntable
Assemble the glass turntable as follows:
•
Insert the rolling ring
•
Insert the glass turntable so the groove on the underneath side of the
glass turntable catch in the drive shaft.
Please note
► When operating the grill, the metal rack can also be used in order to
grill the food evenly as a result of the rotation.
11.6.2 Metal rack
•
Insert the metal rack onto the glass turntable.
11.7 Electrical connection
In order to ensure the safe and trouble-free operation of the device, the
following instructions must be observed for the electrical connection:
•
Before connecting the device, compare the connection data (voltage
and frequency) on the rating plate with those of your electrical network.
This data must agree in order that no damages occur in the device
If in doubt, ask your qualified electrician.
•
The electrical outlet must be protected by a 16A safety cut-out switch.