Caso 7710, Operating Manual, Page: 62 / 66

62
12.11 Electrical connection
In order to ensure the safe and trouble-free operation of the device, the following instructions
must be observed for the electrical connection:

Before connecting the device, compare the connection data (voltage and frequency) on
the rating plate with those of your electrical network. This data must agree in order that
no damages occur in the device. If in doubt, ask your qualified electrician.

The connection between the device and the electrical network may employ a 3 meter
long (max.) extension cable with a cross-section of 1.5 mm². The use of multiple plugs or
gangs is prohibited because of the danger of fire that is involved with this.

Make sure that the power cable is undamaged and has not been installed under or over
hot or sharp surfaces.

This device is not designed to be installed in an RV or used with an inverter.

The electrical outlet must be protected by a 16A safety cut-out switch.

The electrical safety of the device is only guaranteed if the device is connected to a
properly installed protective conductor system. If in doubt, have the house installation
checked over by a qualified electrician. The manufacturer cannot be made responsible
for damages that are caused by a missing or damaged protective conductor.
13 Operation and Handing
This chapter provides you with important notices with regard to operating the device.
13.1 Operating elements and displays
The device transmits the following signal sounds as an acoustic feedback signal:
Please note
► Use the buttons and to set the temperature in the range of 5-20°C.
► Temperature recommendations: Red wine: 12°C – 18°C and white wine 6°C – 10°C.
► The device can achieve the best cooling and consumption results at a recommended
ambient temperature of 16-20 °C.
If you press the
power button the device
starts working.