![CASO DESIGN 11881 Original Instruction Manual Download Page 20](http://html1.mh-extra.com/html/caso-design/11881/11881_original-instruction-manual_2572382020.webp)
20
4.12 Save the hot water quantity
Press the
once, press again and leave your finger on the button until the desired
amount of water is dispensed. Release the button. The quantity is saved.
Please note
► Please ensure that the water does not overflow. You can stop the flow by pressing the
button once more.
4.13 Change the mode
You can set the device to different mode. The different mode are as follows:
Function/mode
ECO (energy-saving
mode)
Fast
Standard
Selected mode can be
recognized as follows
Button
lights
continously and the
others are flashing
Espresso button
lights
continously and
the others are
flashing
Coffee button
lights
continously and the
others are flashing
Illumination
-
+
+
Prebrewing*
+
-
+
Saving of filling level
+
+
+
Automatic switching off
After 10 minutes
After 30 minutes
After 20 minutes
* Pre-brewing: With less water pressure, the ground coffee is moistened and pre-brewed.
Then the device brews with normal water pressure and prepares the coffee.
Press
button for 5 seconds then the
will flash. Press the respective button for
the switch to the selected mode. For Example when switching to the Eco mode press the
button. Two signal tones sound. If the mode should be retained then press
or
wait 5 seconds.
5 Cleaning and Maintenance
This chapter provides you with important notices with regard to cleaning and maintaining
the device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.