Caso Vacuum Sealer System VC100
11
3.5 Disposal of the packaging
Caso believes in the importance of recycling and has selected the packaging materials that
not only protect your unit from damage during transit, but can be recylcled to minimize
ecological impact.
Recylcing the packaging materials preserves raw materials and reduces waste.
Take any packaging materials that are no longer required to a recycling
collection point for proper disposal.
Please note
► If possible, keep the original packaging for the duration of the guarantee period in the
event a return is necessary
3.6 Setup
3.6.1 Setup location requirements:
In order to ensure the safe and trouble-free operation of the device, the setup location must
fulfil the following prerequisites:
The device must be set up on a firm, flat and horizontal surface with sufficient load-
bearing capacity for the vacuum sealer system and the maximum weight of the food that
should be vacuum-sealed.
Select a setup location where children cannot reach the hot sealing strip of the device.
Do not set up the unit in a hot or damp environment or near flammable material.
To operate correctly, the unit requires sufficient air flow. Leave at least 4 inches of space
on all sides when setting up the unit.
Do not move the vacuum sealer system when it is in operation.
The electrical outlet must be easily accessible so that the plug can be quickly
disconnected in the case of an emergency
The set-up of this unit in non-stationary locations (e.g., boats, airplanes, motor homes)
must be carried out by a qualified electrician, provided they guarantee prerequisites for the
safe use of the unit.
