+1-800-661-8443
Third Edition, Nov 2016
ACS V4.2
Page
|
5
Section B. Unit Setup
Section B.
Unit Setup
B.1
Uncrating Requirements
Recommended Tools
Bolt cutters or large pair of wire cutters to remove metal bands
Pry bar (recommend 2)
Claw hammer
Freestanding 10’ Ladder
Forklift
Cordless drill with Robertson/Phillips bit
B.2
Uncrating Procedure
Refer to Figure 4 Uncrating your new Cask ACS.
Inspect crate exterior and document any damage incurred in transit
Cut metal bands and remove from exterior of crate
Use pry bars to remove plywood covering each end (Figure 4 – Step 1)
Next remove plywood skin from top of crate (Figure 4 – Step 2)
Leave end supports and remove all top cross supports with hammer
Brace sides or have someone hold them in place and remove last top cross supports
Gently fold sides of crate down to the floor (Figure 4 – Step 3)
You now have unfettered access to contents
Figure 4 Uncrating your new Cask ACS
Figure 3 In case you’ve never seen a crate before
1
2
3
