65
This section explains how to configure advanced settings for a wireless LAN connection
between the Data Projector and a computer.
z
All of the operations in this section assume that you have already configured the settings
under “Wireless LAN Connection Basics” (page 52).
z
For details about projection operations after establishing a connection, see “Using Wireless
LAN for Projection” (page 91).
Web Setup
In order to modify the settings of a Data Projector manual setup profile and to configure
advanced settings of other Data Projector settings, you need first to display a special web
browser page named “Web Setup” on you computer screen. To display Web Setup, use a
web browser running on a computer that is connected to the Data Projector over a
wireless LAN.
To display and log into the Web Setup page
1
Use the Simple Connection profile to establish a wireless LAN connection
between a computer and the Data Projector.
z
See “Establishing a Wireless LAN Connection with a Single Computer Using a Simple
Connection” on page 53 for more information.
z
If a Simple Connection is already established between the first computer and the Data
Projector, proceed to step 2.
2
On the Wireless Connection window of the computer, click the
button.
z
This will start up the computer’s default browser and display an initial page like the one
shown below.
z
The Web Setup page may not appear if your browser is running already. In this case,
quit the browser and then click the
button again.
Advanced Wireless LAN Connection Settings
Summary of Contents for XJ-S30 - 2
Page 108: ...MA0610 B...
