Casio XJ-450, Service Manual & Parts List

Page: 47 / 66

— 45 —
Code
Related to AD converter
60
61
62
63
I2C error (no response)
70
71
Detail (4)
Error in the peripheral device of SUB CPU
Recovery
Unplug and plug the AC power cord (reset).
Code
0a
0f
Detail (5)
OPM error
Recovery
Unplug and plug the AC power cord (reset).
Code
51: Communication error between CPUs inside
OPM PCB
52: Initial command is not performed.
53: Zoom system drive error
54: Focus system drive error
56: AF sensor temperature error
57: E2P Read/Write error
58: Communication error between OPM and SUB
59: Time out during BUSY
(Time out while OPM_RDY is LOW.)
5a: Does not turn BUSY after reset
(OPM_RDY does not turn LOW right after reset.)
5f: Communication error between SUB CPU and
CPU or time out
Detail (6)
I2C communication error between CPU and
DDP1000
Recovery
Unplug and plug the AC power cord (reset).
Code
90
91
8f
Detail (7)
When the color wheel is stopped while the lamp is lit.
Recovery
Unplug and plug the AC power cord (reset).
Code
8* Color wheel stopped
9* Color wheel stopped
37
Detail (8)
Other DDP1000 error (system error)
Recovery
Unplug and plug the AC power cord (reset).
Code
83: System good error (when an error occurs in
Rambus memory check)
Above a 0 (DAD error)
a*
Above b 0 (DAD error)
b*
Above c 0
c*
Detail (9)
The FAN is not running although the lamp is lit.
Recovery
Unplug and plug the AC power cord (reset).
Code
36
LED status (2)
POWER
Amber flashing (one-second interval) / during cool
down
Red steady / standby
TEMP
Red flashing (two-second interval)