Casio TK-T200 User Manual Download Page 21

Page: 21 / 104

Intr

oducing TK-T200

Minus key

Use this key to input values for subtraction.

Old check key

In a check tracking system, use this key to input the
number of an existing check (previously created using the

key) whose details are stored in the check tracking

memory. Existing checks are reopened to perform further
registration or to finalize them.

Non-add/No sale key

Non-add key: To print reference number (to identify a
personal check, credit card, etc.) during a transaction, use
this key after some numerical entries.
No sale key: Use this key to open the drawer without
registering anything.

Check key

Use this key to register a check tender.

Refund key

Use this key to input refund amounts and void certain
entries.

New check key

In a check tracking system, use this key to input a new
check number in order to open a new check under that
number.

Subtotal key

Use this key to display and print the current subtotal
(includes add-on tax) amount.

Credit key

Use this key to register a credit sale.

Error correct/Cancel key

Use this key to correct registration errors and to cancel
registration of entire transactions.

New balance key

In a check tracking system, use this key to add latest
registered total to the previous balance to obtain a new
balance.

Cash amount tendered key

Use this key to register a cash sale.

• Calculator Mode

Clear/All clear key

Percent key

Ten key pad

, ~

Arithmetic operation key

(

and

)

Memory recall key

[

Drawer open key

Equal key

Summary of Contents for TK-T200









































































































Search results

Summary of Contents for TK-T200

Reviews:

Casio TK-T200, User Manual, Page: 21 / 104

Search results

Summary of Contents for TK-T200

Reviews: