Casio TE-1500 User Manual Download

Page: 87 / 96

Troubleshooting

roub

leshooting

When the cash drawer does not open!

In case of power failure or the machine is in malfunction, the cash
drawer does not open automatically. Even in these cases, you can
open the cash drawer by pulling drawer release lever (see below).

Important!

The drawer will not open, if it is locked with a drawer lock key.

Error

code

Message

Meaning

Action

E101

E103

E105
E106

E112

E114

E139

E146
E200
E201
E202
E205

PLU maintenance file

full. Press <#2> to

exit

PLU Code is not exist.

Input the PLU Code

PLU file full

Item exists in the PLU

FILE

Close the journal

platen arm

Close the receipt

platen arm

Negative balance is not

allowed

Arrangement file full

Insert RAC

Illegal Format

File not found

File already exist.

Scanning PLU direct maintenance/batch maintenance

file becomes full.

PLU code is not existed in the file.

Scanning PLU file full

The designated item has already existed in the

scanning PLU file.

The journal platen arm is opened.

The receipt platen arm is opened.

Attempt to register <–> or <CPN> when the balance

becomes negative.

Arrangement file is full.

RAC is set.

Illegally formatted RAC

The designated file is not found in the RAC.

Can not write, because designated file has already been

in the RAC.

Terminate the maintenance.

Enter proper PLU code.

Modify the designated item.

Close the journal platen arm.

Close the receipt platen arm.

Enter proper minus/coupon amount.

Set the arrangement properly.

Set RAC.

Format the RAC.

Enter proper file name.

Check the operation and retry.

Summary of Contents for TE-1500

































































































Search results

Summary of Contents for TE-1500

Reviews:

Related manuals for TE-1500

Brands by name

Popular brands

Casio TE-1500, User Manual

Search results

Summary of Contents for TE-1500

Reviews:

Related manuals for TE-1500

Brands by name

Popular brands