Casio SE-S300 Page 12 User Manual Download

Page: 12 / 98

Getting Started

To install journal paper

Step 1

Remove the printer cover.

Step 2

Open the platen arm.

Step 3

Ensuring the paper is being
fed from the bottom of the
roll, lower the roll into the
space behind the printer.

Step 4

Put the leading end of the
paper over the printer.

Step 5

Close the platen arm
slowly until it locks
steadily.

Step 6

Remove the paper guide of
the take-up reel.

Step 7

Slide the leading end of
the paper into the groove
on the spindle of the take-
up reel and wind it onto
the reel two or three turns.

Step 8

Replace the paper guide of
the take-up reel.

Step 9

Place the take-up reel into
place behind the printer,
above the roll paper.

Step 10

Press the

key to take

up any slack in the paper.

During machine
installation, press the

key after power on.

Complete

Replace the printer cover.

Summary of Contents for SE-S300



































































































Search results

Summary of Contents for SE-S300

Reviews:

Related manuals for SE-S300

Brands by name

Popular brands

Casio SE-S300, User Manual

Search results

Summary of Contents for SE-S300

Reviews:

Related manuals for SE-S300

Brands by name

Popular brands