Casio QW 5531 Operation Manual Download Page 21

Map Data Source

This watch uses the map database of Tokyo
Cartographic Co., Ltd.

Supported Phone Models

For information about supported phone
models, visit the CASIO Website.

http://world.casio.com/os_mobile/wat/

Specifications

Accuracy at normal temperature :

±15 seconds per month average when time
adjustment by time calibration signal receipt
or by communication with a phone is not
possible.

Timekeeping :

Hour, minute, second, day (2000 to 2099
full auto calendar), day of the week

Signal Receive Functions :

GPS signals: Auto Receive, manual receive
Time calibration signal: Auto Receive
Auto transmitter selection (for JJY, MSF/
DCF77)
Receivable call signs:
JJY (40kHz/60kHz), BPC (68.5kHz),
WWVB (60kHz), MSF (60kHz), DCF77
(77.5kHz)
Last reception result display
Automatic and manual switching between
standard time and summer time.

World Time :

Current time in 39 time zones

 

* and

Coordinated Universal Time (UTC) time
display, summer time auto switching
*

 

Subject to updated by connection

between the watch and a phone.

Mobile Link :

Auto Time Correction

Time setting adjusted automatically at
preset time.

Auto Summer Time Switching

Automatic switching between standard
time and summer time.

Hand alignment correction
Data Communication Specifications

Bluetooth

®

Frequency Band: 2440MHz-2480MHz
Maximum Transmission: 0 dBm (1 mW)
Communication range: Up to 2 meters
(depends on environment)

Stopwatch :

Measurement unit: 1 second
Measuring capacity: 23:59’59” (24 hours)
Measurement function: Elapsed time

Timer :

Setting unit: 1 minute
Countdown range: 24 hours
Countdown unit: 1 second

Alarm :

Setting units: Hours, minutes

Other :

LED light; auto hand position correction;
Power Saving; Low Battery Alert; Airplane
Mode (disables data communication)

Power Supply :

Solar panel and one rechargeable battery

Approximate Battery Life :

Approximately 6 months
Conditions

Not exposed to light under the conditions
below.
GPS time information receive
(approximately 10 seconds): 1 operation/
2 days
GPS location information receive
(approximately 45 seconds): 1 operation/
month
Light: 1 operation/day
Alarm: 1 operation/day

Specifications are subject to change without
notice.

Mobile Link Precautions

Legal Precautions

This watch complies with or has received
approval under the radio laws of various
countries and geographical areas. Using
this watch in an area where it does not
comply with or has not received approval
under applicable radio laws may be a
criminal offense. For details, visit the CASIO
Website.

http://world.casio.com/ce/BLE/

Use of this watch inside of aircraft is
restricted under the aviation laws of each
country. Be sure to follow the instructions of
airline personnel.

Precautions when using Mobile Link

When using this watch in combination with
a phone, keep the watch and phone close
to each other. A range of two meters is
recommended as a guideline, but the local
environment (walls, furniture, etc.), the
structure of a building, and other factors may
require a much closer range.

This watch can be affected by other devices
(electrical devices, audio-visual equipment,
office equipment, etc.) In particular, it can be
affected by operation of a microwave oven.
The watch may not be able to communicate
normally with a phone if a microwave oven
is operating nearby. Conversely, this watch
may cause noise in radio reception and the
video image of a TV.

Bluetooth of this watch uses the same
frequency band (2.4 GHz) as wireless LAN
devices, and use of such devices in close
proximity of this watch may result in radio
interference, slower communication speeds
and noise for the watch and the wireless
LAN device, or even communication failure.

Operation Guide 5531

21

Summary of Contents for QW 5531



























Reviews: