background image

Digital Piano Operations

EN-50

To record a keyboard performance onto a USB 
flash drive

1.

Perform the procedure under “

To prepare to 

use the audio recorder

” (page 

EN-49

).

2.

Touch 

bo

REC

0

.

This enters record standby, indicated by 

bo

REC

0

 

flashing red.
The Digital Piano will enter the RHYTHM Mode at this 
time if it is in the SONG Mode.

• To cancel recording, touch 

bo

REC

0

 again.

3.

To start recording, play something on the 
keyboard or touch 

8

START/STOP

.

*

This causes 

bo

REC

0

 to stop flashing and remain lit 

red, which indicates that recording is in progress.

*

Recording can also be started using other operations. 
For details, see “

Operations that Start Recording

” 

(page 

EN-45

).

• The maximum allowable recording time with the audio 

recorder is approximately 25 minutes, after which recording 
will stop automatically. 

bo

REC

0

 will start to flash to let 

you know when you are running out of recording time, so 
end your recording as soon as possible after flashing starts.

4.

To stop recording, touch 

bo

REC

0

.

• This will store the recording as a WAV file to the USB 

flash drive. Files are automatically assigned names in 
sequence from “TAKE01.WAV” through 
“TAKE99.WAV”.

• The Digital Piano will automatically switch to the 

SONG Mode with the file it just stored selected for 
playback.

5.

To play back the song you just recorded, touch 

8

a

.

To select and playback a file recorded with the 
audio recorder

1.

Perform the procedure under “

To prepare to 

use the audio recorder

” (page 

EN-49

).

2.

Use the 

3

 mode selector button to cycle 

through settings until the “SONG” (SONG 
Mode) indicator is lit.

3.

Use the 

bk

 and 

bl

+

 buttons to select the file 

you want to play.

4.

To start playback, touch 

8

a

.

• Playback stops automatically when the end of the file 

is reached. To stop playback part way through, touch 

8

a

.

To delete a file recorded with the audio recorder

1.

Perform the procedure under “

To prepare to 

use the audio recorder

” (page 

EN-49

).

2.

Use the 

3

 mode selector button to cycle 

through settings until the “SONG” (SONG 
Mode) indicator is lit.

3.

Use the 

bk

 and 

bl

+

 buttons to select the file 

you want to delete.

4.

Hold down 

bo

REC

0

 until “Sure?” appears on 

the display.

5.

To delete the file, touch 

bl

+

. To exit this 

operation without deleting anything, touch 

bk

.

Summary of Contents for Privia PX-S3100

































































































Reviews: