Casio Privia PX-S3000, User Manual

Page: 29 / 94

Digital Piano Operations
EN-28
3.
To disable the arpeggiator, touch bt
ARPEG.
This will cause “AR” to disappear from the
display.
• Enabling FUNCTION parameter 79 (“Arpeggio Hold”)
causes the arpeggio pattern to continue playing even after
you release the keyboard keys of the chord.
• You can use FUNCTION parameter 80 (“Arpeggio Part”) to
specify whether the arpeggiator sounds for both the Upper1
and Upper2 parts when the keyboard is layered with two
tones (page
EN-15 ), or for the Upper1 part only.
• For information about FUNCTION parameters, see
“ Configuring Function Settings (FUNCTION Mode) ” (page
EN-53 ).
■
To select an arpeggiator type
1.
Perform steps 1 and 2 of the procedure under
“
To enable the arpeggiator ” (page EN-27 ) to
enable the arpeggiator.
2.
Hold down the bt ARPEG. button until
“ARPEG.” appears on the display.
This causes the currently selected arpeggiator type to
appear in line two of the display.
3.
Use the
bk
– and
bl
+ buttons to select an
arpeggiator type.
• While the arpeggiator type is displayed, holding down
the bt
ARPEG.
button until the tone name display
appears will select the tone that is recommended for
the displayed arpeggiator type.
• For details about arpeggiator types, refer to the
separate “Built-in Music Data Lists”.
You can split the keyboard in the center for duet play so the
left and right sides have the same ranges. The Duet Mode is
the perfect way to conduct lessons, with the teacher playing
on the left side as the student plays the same song on the
right side.
• You can change the ranges of the left and right keyboards
in octave units from their initial default settings. This comes
in handy, for example, if the initial default range is not
enough when one person is playing the left hand part and
another person is playing the right hand part. For
information about the setting operation, see “
To change the
octaves of the duet keyboards ” (page EN-29 ).
■ Pedal Operation when Playing a Duet
• If you are using the separately available SP-34 Pedal Unit,
the left outer pedal is the left keyboard damper pedal, while
the right outer pedal is the right keyboard damper pedal.
Only the damper pedal for the right keyboard supports half-
pedal operations.
• To use the supplied SP-3 Pedal as a damper pedal that
affects both the left keyboard and right keyboard, connect it
to the
cr
DAMPER PEDAL
jack. In the Duet Mode, this
pedal functions as a damper pedal, regardless of the effect
type assigned to it with the procedure under “
To change the
function of the pedal connected to the DAMPER PEDAL
jack
” (page EN-7 ). Half-pedal operation is not supported in
this case.
• If you connect the supplied SP-3 pedal to the
dl
EXPRESSION/ASSIGNABLE
jack, it can be used as
a soft pedal for both the left and right keyboards.
[ C T R L ] A R P E G.
T : 1 2 0 A R
0 0 1 : S c r e w U p
Splitting the Keyboard for Duet
Play
C3 C4 C5 C6 C3 C4 C5 C6
Split point
Left keyboard Right keyboard
(middle C) (middle C)
Left side damper pedal
Left and right side
damper pedal
Right side damper pedal
(Half-pedal operation
supported)