•
Hex Layer
This setting optimizes for hex layer tones. The damper pedal performs on/off operations.
Stage Setup Number Switching by Bank Select Message and Program Change Message
The bank select message and program change message can be used to switch the stage setup number.
The change target can be switched by the bank select MSB. The change target is specified by the program
change number. The bank select LSB is ignored.
Change Target
Bank Select MSB
Stage Setup
70H
When Stage Set.Chg NRPN is enabled by Instrument settings, number switching by bank select and
program change is ignored. For details about stage setups, see the Instrument’s User’s Guide.
9
Channel After Touch
Message Format:
DnH vvH
n:
MIDI Channel Number
vv:
Value
Receive
Receipt adds, to the tone being sounded, modulation of a depth specified by the value. In
the case of a tone that already has modulation applied, receipt of this message increases the modulation
depth. The modulation effect differs according to the tone being used.
10
Pitch Bend
Message Format:
EnH llH mmH
n:
MIDI Channel Number
ll:
Value LSB
mm:
Value MSB
Transmit
Sent when the bender is operated.
Receive
Receipt changes the pitch of the currently sounding note. The range of the pitch change
depends on the Bend Range value setting.
23
Summary of Contents for Privia PX-5S
Page 83: ......
