Casio PA-2400U Service Manual And Parts List Download Page 17

Page: 17 / 81

— 14 —

REPLACING THE PC CARD

The CASSIOPEIA comes equipped with a PC card slot that supports memory, modem and other PC cards*.

* Use only PC cards that are compatible with the CASSIOPEIA.

Important

• Be sure to keep the dummy card that comes with the CASSIOPEIA inserted in the card slot whenever

you are not using a PC card.

• Be sure to save any unsaved input or edited data before replacing the PC card.

• Never remove the PC card from the CASSIOPEIA while a PC card operation is in progress. Doing so

can corrupt CASSIOPEIA memory and PC card memory.

To replace the PC card

1. Slide the card lock lever in the direction indicated by the arrow.

2. Raise the card eject button.

3. Use the RS-232C cable to connect the CASSIOPEIA to your desktop computer.

4. Insert a new PC card into the slot.

•

Push the card into the slot as far as it will go.

Summary of Contents for PA-2400U


















































































Search results

Summary of Contents for PA-2400U

Reviews:

Related manuals for PA-2400U

Brands by name

Popular brands

Casio PA-2400U, Service Manual And Parts List

Search results

Summary of Contents for PA-2400U

Reviews:

Related manuals for PA-2400U

Brands by name

Popular brands