Casio LK-73, Owner'S Manual

Page: 6 / 24

MIDI
E-56
*2. Sostenuto
This effect performs the same way as sustain, except that
it is applied only to notes that are sounding already
when the pedal is depressed. It does not affect notes that
are played after the pedal is depressed.
J
on
Shifts low range tones one octave lower and “072 PICCOLO”
one octave higher.
J
oFF
Plays low range tones and “072 PICCOLO” at their normal
levels.
1.
Press the TRANSPOSE/TUNE/MIDI button
until the SOUND RANGE SHIFT screen
appears.
2.
Use the [+] and [–] or [0] and [1] buttons to
change the setting.
Example:
To turn SOUND RANGE SHIFT off
There is a wide variety of messages defined under the MIDI
standard, and this section details the particular messages that
can be sent and received by this keyboard. An asterisk is used
to mark messages that affect the entire keyboard. Messages
without an asterisk are those that affect only a particular
channel.
This message sends data when a key is pressed (NOTE ON)
or released (NOTE OFF).
A NOTE ON/OFF message include a note number (to indicate
note whose key is being pressed or released) and velocity
(keyboard pressure as a value from 1 to 127). NOTE ON
velocity is always used to determine the relative volume of
the note. This keyboard does not receive NOTE OFF velocity
data.
Whenever you press or release a key on this keyboard, the
corresponding NOTE ON or NOTE OFF message is sent from
the MIDI OUT terminal.
Š The pitch of a note depends on the tone that is being used,
as shown in the “Note Table” on page A-1. Whenever this
keyboard receives a note number that is outside its range
for that tone, the same tone in the nearest available octave
is substituted.
SOUND RANGE SHIFT (Default: On)
Messages
NOTE ON/OFF
641A-E-058A