Casio LK-73, Owner'S Manual

Page: 5 / 24

E-55
MIDI
J
on
Auto Accompaniment is played by the keyboard and the
corresponding MIDI message is output from the MIDI OUT
terminal.
J
oFF
Auto Accompaniment MIDI messages are not output from
the MIDI OUT terminal.
1.
Press the TRANSPOSE/TUNE/MIDI button
until the ACCOMP MIDI OUT screen appears.
Example:
When ACCOMP MIDI OUT is off
2.
Use the [+] and [–] or [0] and [1] buttons to turn
the setting on and off.
Example:
To turn ACCOMP MIDI OUT on
J
0
Normal touch curve
J
1
Louder than normal tone, even when little pressure is used to
press keyboard keys. When touch response is turned off,
sound is produced at a louder volume than normal.
1.
Press the TRANSPOSE/TUNE/MIDI button
until the TOUCH CURVE SELECT screen
appears.
2.
Use the [+] and [–] or [0] and [1] buttons to
change the setting.
Example:
To select touch curve 1
J
SUS (sustain)
Specifies a sustain
*1
effect when the pedal is depressed.
J
SoS (sostenuto)
Specifies a sostenuto
*2
effect when the pedal is depressed.
J
SFt (soft)
Specifies reduction of the sound’s volume when the pedal is
depressed.
J
rHy (rhythm)
Specifies the START/STOP button operation when the pedal
is depressed.
1.
Press the TRANSPOSE/TUNE/MIDI button
until the SUSTAIN/ASSIGNABLE JACK screen
appears.
Example:
When sustain is currently set
2.
Use the [+] and [–] or [0], [1], [2], and [3] buttons
to change the setting.
Example:
To select rhythm
*1. Sustain
With piano tones and other sounds that decay, the pedal
acts as a damper pedal, with sounds being sustained
longer when the pedal is depressed. With organ tones
and other continuous sounds, notes played on the
keyboard continue to sound until the pedal is released.
In either case, the sustain effect is also applied to any
notes that are played while the pedal is depressed.
ACCOMP MIDI OUT (Default: Off)
TOUCH CURVE (Default: 0)
SUSTAIN/ASSIGNABLE JACK
641A-E-057A