EN-22
This section explains the meanings of the error messages that
appear on the display if the data transfer operation fails or if
some other problem occurs. To clear an error message,
pressing any button other than the power button. Note that
the “EnterApp” message will disappear automatically after a
few seconds if you do not perform any operation. If “ReCV
Err” appears on the display when you use the Play Mode, the
error message will disappear and normal operation will
resume after a connection is established correctly.
This Digital Keyboard can be connected to commercially
available stereo, amplifier, or recording equipment, to a
portable audio player or other equipment.
Connect a commercially available connection cord to the
dp
PHONES/OUTPUT
jack.
•
The connecting cord should have a stereo standard plug on
one end and a plug that matches the configuration of the
input jack of the external device on the other end.
• Turn off the external device when making connections.
After connecting, turn down the Digital Keyboard and
external device volume levels whenever turning power on
or off.
• After connecting, turn on the Digital Keyboard and then the
external device.
• If Digital Keyboard notes sound distorted when they are
sounded from external audio equipment, lower the Digital
Keyboard’s volume setting.
Connect a commercially available connection cord to the
dn
AUDIO IN
jack.
•
The connecting cord should have a stereo mini plug on one
end and a plug that matches the configuration of the output
jack of external device on the other end.
• Notes from an external device may not sound normally if
the Digital Keyboard’s APP function is enabled.
• Turn off the Digital Keyboard when making connections.
After connecting, turn down the Digital Keyboard and
external device volume levels whenever turning power on
or off.
• After connecting, turn on the external device and then the
Digital Keyboard.
• If notes are distorted when they are sounded on the
external device, lower the volume setting of the external
device.
Error Messages
Display
Cause
Action
ReCV Err
1. Disconnected
audio cable.
1. Correctly connect the
audio cable and then
try again.
2. App closed while it
was playing data.
2. Start up the app and
try again.
App Vol+ App volume is too
low.
Raise the volume of the
app.
App Vol– App volume is too
high.
Lower the volume of
the app.
Mem Full Not enough memory
capacity for song data
to be transferred in
the Save Mode.
Delete user songs you
no longer need in order
to free up memory
space.
Data Err
Digital Keyboard was
unable to correctly
receive data sent
from the app.
Try again.
EnterApp Data received from
an app while the APP
function is not
enabled.
Enable the APP
function and try again.
Save Err
Data save failed.
Try saving to a different
area.
Del Err
Data delete failed.
Try again.
Connecting External Devices
Connecting to Audio Equipment
Outputting Digital Keyboard Notes to Audio
Equipment
Playing an External Device from the Digital
Keyboard
LK265_190-ES-1A.indd 24
2016/07/15 10:12:36
