10
Item
Specification
Memo
Connector type
Direct Sync 16pin IO Connect
Use USB cable or USB
cradle
Baud rate
USB 2.0 high-speed (480Mb/s)
HOST
Power to
external
device
voltage: 5.0V±0.25V
current : up to 500mA
USB
Client
Baud rate
USB 2.0 high-speed (480Mb/s)
Number of pixels
8M pixels
3264(H)x2448(V)
F number (Aperture)
2.4
Image capture range
10cm ～ ∞
Auto Focus
It has Auto Focus function.
Rear Camera
Flash
LED Flash
Number of pixels
2M pixels
1200(V)x1600(H)
F number (Aperture)
2.8
Front Camera
Image capture range
34cm ～ ∞
Speaker
Scanning notice, Warning sound
Receiver
For voice call at phone network and VoIP
Earphone and microphone Jack
φ3.5
＊1 Pin layout
Microphone
Voice sound input
Sensors
Proximity sensor / Light Ambient sensor /
Acceleration sensor / Gyroscope-sensor
RTC
Maximum monthly rate
2min10sec (Use main battery)
8min38sec (Use sub batery only)
Main Battery pack
charge period
Standard Battery: Around 4 hours
Large Battery: Around 8 hours
※The above specification is only for the temperature
of 10～40℃.
※For the temperature of 0～10℃ and 40～50℃,
in order to protect battery cell, charge control
changes. Therefore, in these temperature
environment, battery indicator might not become
100% after the charge ends and charge status LED
turns green.
In addition, the charge will stop when the
temperature of ≦ 0℃ and ≧ 50℃.
Charge status LED:
<External power supplied>
Red: Charging
Green: Charged
Red Blink:
Temperature failure
remaining battery low
Red and Green Blink:
Battery pack failure or
removal warning
<No
external
power
supplied>
Red : Battery level low
(11～20%)
Red Blink : Battery level
very low (≦10%)
Charge
Sub Battery pack
charge period
Around 3 hours
※The above specification is only for the temperature
of 10～40℃ and it is from mian battery attached to
sub battery fully charged. The charge will stop when
the temperature of ≦ 0℃ and ≧ 40℃.
*1
No.
Description
1 Audio out（Left）
2 Audio out（Right）
3 GND
4 Microphone
