– 48 –
IT-9000
[4] Current - Charge (AC Adapter)
[ NOTE ]
Before starting test, set a battery pack that is not fully charged (7.8 V or less) to IT-9000,
and then supply power to IT-9000 from the AC adaptor.
No.
Operation
Display
Test Details
1
Select “[4].Current -
Charge(AC Adapter)” from
MENU-5 screen.
Automatically judges if the
current value is within –100 to
–1200 mA.
If OK.
The screen returns to the menu
screen.
If out of range (Failure):
An error indication is displayed.
Press the “ENT” key to return to
the menu screen.
[6] SD Write Protect
[ NOTE ]
Be sure that the lock switch of the SD card is not set to the write-protect position, and
then insert the SD card into the SD card slot of IT-9000.
No.
Operation
Display
Test Details
1
Select “[6].SD Write Protect”
from MENU-5 screen.
When the screen on the right
appears, remove the SD card
and press the “ENT” key.
Write protect signal becomes
invalid.
2
Automatically judges if the write
protect signal becomes valid.
If OK:
The screen returns to the menu
screen.
If any problem:
An error indication is displayed.
Press the “ENT” key to return to
the menu screen.