72
3.15 Disk Format
Function
Formats the RAM disk and F-ROM drive.
Fig. 3.18
Operation
In the screen shown above, use the “2” or “8” key to select whether the RAM disk or user drive is to
be formatted, then press the “RET” key. This makes the following screen appear. In this screen press
the “1” key to move the cursor onto "YES" and press the “RET” key to start formatting. If either the
“RET” key is pressed while the cursor is on “NO”, or “CLR” key is pressed while the cursor is on
“YES”, the formatting operation will be canceled.
Fig. 3.19 Fig. 3.20
