Casio GV-20 User Manual Download Page 51

Page: 51 / 91

RECORDING IMAGES

Flash Status Indicators

You can find out the current flash unit status by checking the
monitor screen and the operation lamp.

Operation lamp

Monitor screen

If the operation lamp is doing this:

Flashing amber

Flashing red

It means this:

Flash unit is charging.

Flash unit cannot charge
for some reason.

Operation Lamp

Monitor Screen

is shown on the monitor screen when auto flash is se-

lected.

Precautions when Using Flash

• Make sure that you do not touch or block the flash or the

exposure sensor with your fingers. Doing so can soil these
components and interfere with correct flash operation.

• The effective range for the built-in flash is approximately

0.6m to 2m (2.0´ to 6.6´) (at full aperture).
Note that you may not be able to obtain the desired flash
result outside the ranges noted above.

• Depending on operating conditions (type of batteries being

used, temperature, etc. ), it may take up to 10 seconds for
the flash unit to charge.

• The flash does not fire in the continuous shutter mode or

movie mode. This is indicated by

on the monitor

screen.

Flash

Exposure sensor

Summary of Contents for GV-20




























































































Search results

Summary of Contents for GV-20

Reviews:

Casio GV-20, User Manual, Page: 51 / 91

Search results

Summary of Contents for GV-20

Reviews: