manualshive.com logo in svg

Casio Exilim EX-ZR800, User Manual

The Casio Exilim EX-ZR800 is a high-performance digital camera that captures stunning photos with ease. With features like a wide-angle lens and fast shutter speed, it guarantees crisp and vibrant images. To unleash its full potential, make sure to download the free user manual from our website for detailed instructions and tips.

Share
Download
background image

64

Recording Movies

IMPORTANT!

• Spending a long time using movie recording will cause the camera to become 

slightly warm to the touch. This is normal and does not indicate malfunction.

• Shooting movies for long periods in areas where temperature is relatively high can 

cause digital noise (dots of light) to appear in the movie image. A rise in the 
camera’s internal temperature also may force movie recording to stop 
automatically. If this happens, stop recording and allow the camera to cool down, 
which should cause normal operation to resume.

• Using the camera’s built-in memory or certain types of memory cards can slow 

down processing speed. Whenever possible use an Ultra High-Speed Type 
memory card. Note, however, that not all operations can be guaranteed even if an 
Ultra High-Speed Type memory card is used. Certain movie quality settings can 
result in too much time being required to record data, which can result in breaks in 
the image and/or audio during playback. If this happens, the 

Y

 will turn yellow on 

the monitor screen.

NOTE

• Zoom operations are supported during movie recording (page 50). Zoom is 

disabled during high speed movie recording. To use zoom for high speed movie 
recording, perform the zoom operation before you press [

0

] (Movie) to start 

recording.

• Both Single SR Zoom (page 53) and Multi SR Zoom (page 54) are disabled during 

movie recording.

• The effects of camera movement in an image become more pronounced when you 

shoot close up or with a large zoom factor. Because of this, use of a tripod is 
recommended under these conditions.

• Except for High Speed Movie, Continuous AF (page 105) is performed during 

movie recording while “AF” (Auto Focus) or “Macro” is selected for the “Focus” 
setting.

• Face Detection is disabled during normal FHD and STD, and high speed movie 

recording. Face Detection is enabled when shooting movies with Premium Auto 
Pro (FHD and STD).

• The following functions do not support movie recording.

Triple Shot, Multi SR Zoom, some BEST SHOT scenes

• The A, S, and M recording modes are not supported when shooting a movie, or 

when using the “Prerecord (Movie)” and “For YouTube” BEST SHOT scenes. In 
these cases, the recording mode is always 

P

(Program Auto).

Summary of Contents for Exilim EX-ZR800








































































































































































































Reviews:

No comments

Related manuals for Exilim EX-ZR800

Hamilton HTK Programming Manual preview
HTK
Brand: Hamilton Pages: 135
Panasonic PalmCam PV-SD5000 User Manual preview
PalmCam PV-SD5000
Brand: Panasonic Pages: 76
Panasonic LUMIX GH5 II Settings Manual preview
LUMIX GH5 II
Brand: Panasonic Pages: 24
Panasonic Lumix DMC-ZS5 Operating Instructions Manual preview
Lumix DMC-ZS5
Brand: Panasonic Pages: 178
Panasonic Lumix DMC-TZ30 Operating Instructions Manual preview
Lumix DMC-TZ30
Brand: Panasonic Pages: 197
Panasonic Lumix DMC-LX7 Basic Operating Instructions Manual preview
Lumix DMC-LX7
Brand: Panasonic Pages: 28
Panasonic Lumix DMC-FH22 Basic Operating Instructions Manual preview
Lumix DMC-FH22
Brand: Panasonic Pages: 34
Panasonic Lumix DMC-TZ60 Quick Manual preview
Lumix DMC-TZ60
Brand: Panasonic Pages: 2
Panasonic Lumix DMC-TS20 Brochure preview
Lumix DMC-TS20
Brand: Panasonic Pages: 2
Panasonic Lumix DMC-S1 Owner'S Manual preview
Lumix DMC-S1
Brand: Panasonic Pages: 82
Panasonic Lumix DMC-L1 Operating Instructions Manual preview
Lumix DMC-L1
Brand: Panasonic Pages: 136
Panasonic Lumix DMC-TS5 Connection Manual preview
Lumix DMC-TS5
Brand: Panasonic Pages: 2
Panasonic Lumix DC-GH5 Basic Owner'S Manual preview
Lumix DC-GH5
Brand: Panasonic Pages: 128
Olympus Camedia D-575ZOOM Basic Manual preview
Camedia D-575ZOOM
Brand: Olympus Pages: 180
Olympus Camedia D-575ZOOM Quick Start Manual preview
Camedia D-575ZOOM
Brand: Olympus Pages: 2
Canon EOS Rebel T3 18-55mm IS II Kit Quick Reference Manual preview
EOS Rebel T3 18-55mm IS II Kit
Brand: Canon Pages: 2
Delta DH-IPC-A12P User Manual preview
DH-IPC-A12P
Brand: Delta Pages: 5
Conrad Visiondrive 84 04 63 Operating Instructions Manual preview
Visiondrive 84 04 63
Brand: Conrad Pages: 8

Brands by name

Popular brands

Load more brands