28
Snapshot Tutorial
The control panel can be used to configure camera settings.
1.
In the REC mode, press
[
8
].
2.
Use [
8
] and [
2
] to select
the setting you want to
change.
This will select one of the
control panel icons and display
its settings.
• The content of the control panel is different when shooting a movie and when
using some BEST SHOT scenes (Move Out CS, Move In CS, Multi-motion
Image).
3.
Use [
4
] and [
6
] to change the setting.
4.
If you want to configure another setting, repeat steps 2 and 3.
5.
After all of the settings are the way you want, press [SET].
This will apply the settings and return to the REC mode.
NOTE
• You also can configure settings other than those listed above (page 76).
Using the Control Panel
[SET]
[
8
] [
2
] [
4
] [
6
]
1
9
5
3
4
7
8
2
6
Control panel
1
Exposure mode (page 29)
2
Image size/Quality
*
3
4
5
EV shift (page 40)
6
Metering mode (page 41)
7
AF area (page 41)
8
Flash (page 35)
Continuous shutter (CS) speed (High-speed CS, Flash CS modes)
(pages 50, 51)
9
Date/Time (page 43)
Prerecord (Still image) Time (High-speed CS mode) (page 51)
Flash continuous shutter (CS) images (Flash CS mode) (page 50)
*
Image quality cannot be changed using the control panel.
