background image

— 2 —

Exposure Control

Metering:

Multi-pattern by imaging element

Exposure:

Program AE

Exposure Compensation:

–2EV to +2EV (in 1/3EV steps)

Shutter

CCD shutter, mechanical shutter

1/4 to 1/8000 second

Aperture

F2.5 fixed

White Balance

Automatic/fixed (4 modes) /Manual

Self-timer

10 seconds

Built-in Flash

Flash Modes:

Auto, Off, On, Red-eye reduction

Approximate Flash Range:

1 meter to 2 meters

Recording Functions

Snapshot (with audio for EX-M1 only); self-timer; Night Scene; Movie (with audio for EX-M1

only); voice recording (EX-M1 only)

* Audio is monaural

Audio Recording Time

Audio Snapshot:

Approximately 30 seconds maximum per image

(EX-M1 only)

Voice Recording:

Approximately 50 minutes with built-in memory

After Recording:

Approximately 30 seconds maximum per image

Monitor Screen

1.6-inch TFT color LCD

84,960 pixels (354 x 240)

Viewfinder

Monitor screen and optical viewfinder

Timekeeping Functions

Built-in quartz digital clock

Date and Time: Recorded with image data

Auto Calendar: To 2049

Input/Output Terminals

Cradle connector

(EX-M1 connector is also used for connection of remote controller.)

Speaker (EX-M1 only)

20mm round, monaural

Audio Player Function

Data Compression/Decompression:

MP3 (MPEG-1 Audio Layer-3)

(EX-M1 Only)

Sampling Frequencies:

32kHz, 44.1kHz, 48kHz

Bit Rates:

32 to 210 kbps, VBR-compatible

Play Mode:

Normal, all track repeat, 1-track repeat

Practical Maximum Headphone Output:

9mW + 9mW (16 

)

Power Supply

Power Requirements:

Rechargeable lithium ion battery (NP-20) x 1

Approximate Battery Life:

The values noted above are approximate values until power fails, based on continuous recording with flash off, at normal

temperature (25

°

C). The above does not guarantee that you will be able to achieve this level of operation. Low temperatures

shorten battery life. Voice recording times are based on continuous recording, while audio playback times are based on

continuous output (through headphones).

* Voice recording and audio playback times apply to the EX-M1 only.

Power Consumption

DC 3.7V Approximately 3.0W

Continuous Recording

Continuous Playback (Continuous Snapshot Recording)

Continuous Voice Recording*

Continuous Audio Playback*

80 minutes (480 shots)

110 minutes

80 minutes

330 minutes

Summary of Contents for EX-M1 - EXILIM Digital Camera


























Reviews: