Casio EX-M1 - EXILIM Digital Camera, Service Manual And Parts List

Page: 15 / 25

— 13 —
6. Removing the SUB PCB ASSY
1 Unsolder the five lead wires.
2 Remove the hook and then the SUB PCB ASSY.
The SUB PCB is connected to the MAIN PCB by the CONNECTOR.
Note in assembling
*1 Position these four lead wires in the space between the MAIN PCB and the SUB PCB.
*2 Make sure that this lead wire does not touch the battery spring.
7. Removing the STROBE UNIT (NOTE: The STROBE UNIT does not need be discharged.)
1
Remove the STROBE PLATE.
2
Remove the CONNECTOR and then the STROBE UNIT.
2
1
×
2 *1
×
2 *1
×
1 *2
1
2
Remove the CONNECTOR by twisting
it toward the right by a pliers.
NOTE:
Pinch the reinforced part so that the
CONNECTOR is not hurt.
Use a pliers when assembling also.