131
Using the Camera with a Computer
Install the required software in accordance with what version of the Macintosh OS
you are running and what you want to do.
IMPORTANT!
• The camera does not support operation with Mac OS 8.6 or earlier, or Mac OS X
10.0. Operation is supported with Mac OS 9, X (10.1, 10.2, 10.3, 10.4, 10.5) only.
Use the standard USB driver that comes with your supported operating system.
.
To connect the camera to your computer and save files
1.
Turn on the camera and press [MENU].
2.
On the “Set Up” tab, select “USB” and then press [
6
].
3.
Use [
8
] and [
2
] to select “Mass Storage”, and then press [SET].
4.
Turn off the camera. Next, rotate the cover lock dial in the [
4
OPEN]
direction and open the memory card/terminal cover.
Using the Camera with a Macintosh
When you want to
do this:
Operating
System Version
Install this software:
See
page:
Save images to your
Macintosh and view
them there manually
OS 9
Installation not required.
OS X
Save images to your
Macintosh
automatically/
Manage images
OS 9
Use commercially available
software.
OS X
Use iPhoto, which comes bundled
with some Macintosh products.
Play movies
OS 9 / OS X
You can playback with QuickTime,
which comes bundled with your
operating system.
Connecting the Camera to Your Computer and Saving Files
