141
Other Settings (Set Up)
Procedure
[MENU]
*
Set Up Tab
*
File No.
Use the following procedure to specify the rule that governs generation of the serial
number used in file names (page 136).
Procedure
[MENU]
*
Set Up Tab
*
World Time
You can use the World Time screen to view the current time in a zone that is different
from your Home City when you go on a trip, etc. World Time displays the current time
in 162 cities in 32 time zones around the globe.
1.
Use [
8
] and [
2
] to select “World” and then press [
6
].
• To change the geographic area and city for the time where you normally use
the camera, select “Home”.
2.
Use [
8
] and [
2
] to select “City” and then press [
6
].
• To change the “World” setting to summer time, use [
8
] and [
2
] to select
“DST” and then select “On”. Summer time is used in some geographical areas
to advance the current time setting by one hour during the summer months.
Specifying the File Name Serial Number Generation Rule
(File No.)
Continue
Tells the camera to remember the last used file number. A new file will
be named using the next sequential number, even if files are deleted or
if a blank memory card is loaded. If a memory card is loaded and that
card already has files stored on it and the largest sequential number in
the existing file names is greater than the largest sequential number
remembered by the camera, numbering of new files will start from the
largest sequential number in the existing file names plus 1.
Reset
Restarts the serial number from 0001 whenever all files are deleted or
when the memory card is replaced with a blank one. If a memory card
is loaded and that card already has files stored on it, numbering of new
files will start from the largest sequential number in the existing file
names number plus 1.
Configuring World Time Settings (World Time)
