70
Connecting the Camera with a Smartphone
(Wireless Connection)
The first time you establish a wireless connection between the camera and a
smartphone, you need to use the procedure below to configure wireless connection
settings. This operation is required for the first connection only.
.
Smartphone that supports Bluetooth Smart
Connecting the camera to a smartphone using Bluetooth wireless technology
(pairing) makes it simple to configure wireless connection settings.
IMPORTANT!
• Performing this operation automatically configures your smartphone’s wireless
LAN connection settings (page 71).
• Some smartphone models may not be compatible with this camera.
• If you want to re-pair the camera with the smartphone it is already paired with, first
unpair them and then pair again. Re-pairing the camera and smartphone will result
in all pending unsent images to remain unsent.
Camera (Controller) Operation
1.
Touch the “
” (Wireless) icon.
This will display the wireless mode screen.
2.
Touch “Pairing”.
3.
Touch “Start”.
• You can start pairing by performing an operation on the camera, without using
the controller.
On the camera, hold down [
p
] (Power) for about two seconds to turn off
power.
On the camera, hold down [
p
] (Power) for about six seconds.
The camera’s operation lamp will flash amber.
Smartphone Operation
4.
Start up the EXILIM Connect app.
5.
Tap “Pairing”.
6.
Perform the required connection operation as instructed by the app
and your smartphone.
This establishes a Bluetooth wireless technology connection between the camera
and smartphone.
• For information about how to configure wireless connection settings, refer to
the EXILIM Connect manual (page 68).
Establishing a Wireless Connection for the First Time
