93
Using the Camera with a Computer
To view copied images
1.
Double-click the cameras drive icon.
2.
Double-click the DCIM folder to open it.
3.
Double-click the folder that contains the images you want to view.
4.
Double-click the image file you want to view.
For information about file names, see Memory Folder Structure on page 95.
An image that was rotated on the camera will be displayed on your Macintosh
screen in its original (unrotated) orientation.
To play back a movie, first copy it to your Macintosh and then double-click the movie
file.
Minimum Computer System Requirements for Movie Playback
The minimum system requirements described below are necessary to play back
movies recorded with this camera on a computer.
The above are recommended system environments. Configuring one of these
environments does not guarantee proper operation.
Certain settings and other installed software may interfere with proper playback of
movies.
Movie Playback Precautions
Proper movie playback may not be possible on some Macintosh models. If you
experience problems, try the following.
Shut down other applications that are running.
Be sure to move the movie data to the hard disk of your Macintosh before trying to
play it. Proper movie playback may not be possible for data accessed over a
network, from a memory card, etc.
Playing a Movie
Operating System : Mac OS X 10.6 or higher
Required Software: QuickTime Player (installed on computer)
Summary of Contents for EX-FR100CT
