56
Snapshot Tutorial
• If there is not enough available capacity on the memory card, you may not be able
to record the number of CS images indicated on the monitor screen. Make sure
your memory card has sufficient remaining capacity before shooting with using
continuous shutter.
• With continuous shutter, exposure and focus for the first image are applied for
successive images as well.
• When using a continuous shutter mode, keep the camera still until shooting is
finished.
• In the Continuous Shutter mode, the flash setting automatically becomes
?
(Flash Off).
• Zoom is disabled during continuous shutter operations.
• The following image sizes cannot be selected while shooting with High Speed CS:
“10M”, “3:2”, “16:9”. Entering the High Speed CS mode while any one of these
image sizes is selected will cause the image size setting to change to “9M”
automatically.
• The maximum number of images that can be recorded during each High Speed CS
session is limited, regardless of how much memory card storage capacity is
available.
The number of images will be restricted even further or shooting may be impossible
when remaining memory card capacity is less than the allowable number of images
for a particular CS mode.
• The Triple Self-time cannot be used in the High Speed CS mode.
• The Self-timer cannot be used in the Prerecord CS mode.
• When using Prerecord CS, if you release the half-pressed shutter button before
pressing it the rest of the way down, all of the pre-recorded images currently in the
buffer will be deleted.
Continuous Shutter Precautions
High Speed CS
Specified maximum number of continuous shutter shots
(Max CS shots)
Š
