DT-X100 Hardware Manual
P.19
CASIO COMPUTER CO., LTD.
No.
Name
Description
1 Indicator 1
Orange: Charging the battery pack.
Green: Charging the battery pack is complete.
Red: Battery pack error or the surrounding temperature is out of the charging
temperature range.
2 Indicator 2
Flashes in blue when operating via Bluetooth or in orange when operating via
WLAN.
Lights in green when reading a bar code successfully.
3 Speaker
Buzzer and voice messages are output here.
4 Power Key
Turns the power on and off.
5 Protector
Protector
6 Screen
Displays text and operating instructions
7 Trigger Center Key
Used to perform bar code reading. Can be assigned an arbitrary function.
8 Cursor Keys
Perform the same functions as the up and down arrow keys on a PC keyboard.
9 Enter Key
Press when fi nishing entering numerical values or when moving to the next step.
10 Numeric Keys
Used to enter numeric values and decimal points.
11 Fn Key
Used to make various settings in combination with the function keys or numeric
keys or when starting a pre-registered application.
12 CLR Key
Used to clear one letter to the left of the cursor.
13 Function Keys
Various functions other than bar code reading can be assigned to
these keys.
The default key assignments are as follows.
F1: Similar function as the Alt key on a PC keyboard.
F2: Similar function as the Shift+Tab keys combination on a PC
keyboard. Used to move the cursor among entry or selection
items.
F3: Similar function as the Tab key on a PC keyboard. Used to
move the cursor among entry or selection items.
F4: Not assigned.
F5: Enter a space.
F6: Similar function as the cursor left key on a PC keyboard.
F7: Similar function as the cursor right key on a PC keyboard.
F8: Select text entry mode.
(The mode changes in order of Numeric ➝ Uppercase letter ➝
Lowercase letter)
14 Microphone
Used to input a sound including voice.
15 Trigger R Key
Used to perform bar code reading.
16 Trigger L Key
Used to perform bar code reading.
17 Barcode Reader Port
Laser light or LED light is emitted from this window that reads bar codes.
18 IR Port
Used for communication with IrDA Printer.
19 Power Contacts
Used to receive power provided by the USB Cradle or Ethernet Cradle.
20 Data Communication Terminal
Used for data communications.
21 Strap Holes
Used to attach the hand strap. Also used for the hand belt.
22 Reset Switch
Used to reset the Handheld Terminal.
23 Hand Belt Holes
Used to attach the hand belt.
24 Battery Pack Cover Lock
Used to lock the battery cover and to release.
25 Battery Pack Cover
Used to cover the battery compartment that holds the battery pack inside.
26 Mount Holes
These holes hold the terminal seating in the optional USBCradle or in the Ethernet Cradle.