manualshive.com logo in svg

Casio CTK-6300in, User Manual

Share
Download
Casio CTK-6300in User Manual Download Page 41

Using the Mixer

E-40

• For details about how initial default settings are configured 

when you perform the following procedure, see “Parameter 
List” (page E-125).

1.

While the mixer screen is displayed, hold down 
the R-13 (FUNCTION) button as you press the 
C-13 (MENU) button.

• This displays the mixer menu screen with the 

0

 next to 

“Initialize”.

2.

Press the R-16 (ENTER) button.

3.

In response to the “Sure?” message that 
appears, press the R-14 (YES) button to 
initialize all mixer parameters or the R-14 (NO) 
button to cancel.

1.

While the mixer screen is displayed, hold down 
the R-13 (FUNCTION) button as you press the 
C-13 (MENU) button.

• This displays the mixer menu.

2.

Use the R-17 (

y

) button to move the 

0

 to 

“Display” and then press the R-16 (ENTER) 
button.

3.

Use the dial or R-14 (–, +) buttons to change the 
setting.

4.

After the setting is the way you want, press the 
R-15 (EXIT) button to exit the menu.

To initialize all mixer parameters

To change the information displayed by the 
level meter while configuring part parameter 
settings

To select display of this 

information:

Select this setting:

Part parameter setting values

Param

Volume level

Meter

Summary of Contents for CTK-6300in



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands