Connecting External Devices
EN-12
5.
Configure the music software settings to select
“CASIO USB-MIDI” as the MIDI device.
• For information about how to select the MIDI device,
see the user documentation that comes with the music
software you are using.
• Be sure to turn on the Digital Piano first before starting
up your computer’s music software.
• Once you are able to connect successfully, there is no
problem with leaving the USB cable connected when you
turn off your computer and/or Digital Piano.
• This Digital Piano conforms to General MIDI Level 1 (GM).
• For detailed specifications and connections that apply to
MIDI data send and receive by this Digital Piano, see the
latest support information provided by the website at the
following URL.
http://world.casio.com/
A keyboard channel is the channel used for sending Digital
Piano data to a computer. You can select the channel you
want for sending Digital Piano data to a computer.
• The keyboard channel setting range is 01 to 16.
The initial default keyboard channel setting is 01.
1.
While holding down
4
, press the minus (–) or
plus (+) key within the KEYBOARD CH area of
the keyboard to change the keyboard channel.
• Each press of a key increases or decreases the current
setting by 1.
• To return to the initial default setting (01), press the
minus (–) and plus (+) keys at the same time.
There are times when exchanging data with a computer when
you may not want the Digital Piano to sound notes you play on
its keyboard. The local control setting lets you do just that.
1.
While holding down
4
, press a key within the
LOCAL area of the keyboard to change the local
control setting.
• The initial default local control setting is ON. Selecting
OFF for this setting disables output from the Digital
Piano’s speakers.
Connection requires commercially available connecting cords,
supplied by you. The connecting cords should have a stereo
standard plug on one end and a plug that matches the
configuration of the external device on the other end.
• Turn off the external device when making connections.
After connecting, turn down the Digital Piano and
external device volume levels whenever turning power
on or off.
• After connecting, turn on the Digital Piano and then the
external device.
• If keyboard notes sound distorted when they are
sounded from external audio equipment, lower the
Digital Piano’s volume setting.
MIDI Settings
Keyboard Channel
KEYBOARD CH
+
-
Local Control
Outputting Keyboard Notes to
Audio Equipment
LOCAL
ON
OFF
Digital Piano
PHONES/OUTPUT
jack
Stereo standard plug
Audio equipment, amplifier,
etc
.
CDP135_e.book 12 ページ ２０１７年２月１４日 火曜日 午前１０時４５分
